The Edge 540 BP 3D combines the sturdy construction of a balsa/lightweight plywood airframe with the uninhibited 3D capability of a lightweight profile park flyer. It’s all made possible by its intelligently engineered, open structure design that keeps weight to a bare minimum while providing all the structural integrity of a real wooden airframe. This feather-light construction, combined with a high-output brushless motor, will provide spine-tingling 3D and freestyle performance that will let you really push the limits. And it comes from the factory 90% built and covered in genuine UltraCote, so you can be up and flying in no time.
Specifications
Wingspan: | 35.5in (900mm) |
Overall Length: | 36.5 in (930mm) |
Wing Area: | 410 sq in (26.5 sq dm) |
Flying Weight: | 15-16 oz (425-455g) |
Motor Size: | Park 400 or Park 450 |
Radio: | 6 channels (for proper mixing) |
Servos: | 4 sub-micro |
Trim Scheme Colors: | Ultracote Lite Transparent Clear (HANU964), Ultracote Lite Transparent Yellow (HANU967),Ultracote White (HANU870),Ultracote True Red (HANU866) |
CG (center of gravity): | 4 1/2-inch (114mm) |
Prop Size: | 11x3.8 slowflyer (park 400) or 12x6 E (Park 450) |
Hardware Included: | Yes |
Speed Control : | 20A Brushless |
Recommended Battery: | 11.1V 3-cell 910-1320mAh Li-Po |
Control Throw (Ailerons): | 1" (25mm) with 20% Expo on Low or 2" (50mm) with 40% Expo on High |
Control Throw (Elevator): | 2" (50mm) with 20% Expo on Low or 2-3/4" (70mm) with 45% Expo on High |
Control Throw (Rudder): | 3-1/2" (89mm) Left and Right |
Scale: | Park Flyer |
Approx. Assembly Time: | 3-4 Hours |
Needed to Complete
Needed to Complete
6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Motor
20A Brushless ESC
Propeller
Battery & Charger