DX3E 3 CH RADIO DSM RADIO

Overview

Revolutionizing the industry yet again, Spektrum™ announces their most affordable 2.4GHz system ever offered. Packed with features and added value, the DX3E is just what consumers have been asking for. It’s tough to beat this easy-to-use system, with its modern Spektrum styling, interference-free driving, and added features such as battery indicator LEDs and steering dual rates plus compatibility with all Bind-N-Drive™ vehicles.

Features

  • 3-channel surface system
  • Spektrum™ 2.4GHz DSM® technology
  • Includes SR300 DSM 3-channel receiver
  • One S200 digital servo included
  • One model memory (see the Tech Notes on the Specs tab about how to use the DX3E with multiple models)
  • 2-position, 3-position or linear auxiliary setting
  • Steering dual rate knob for easy adjustment
  • Independent travel adjustment dials for all three channels
  • Battery voltage level indicator LEDs
  • Servo reversing on all three channels
  • Compatible with DSM2™ and the MR3000 receivers, in addition to DSM surface receivers.
  • 4 AA alkaline batteries and a medium-size grip included (other grip sizes sold separately - SPM9006)
  • Charge jack port for use with optional rechargeable batteries (SPM9525) and charger (SPM9526)

Specs

# of Channels: 3
Modulation: DSM (compatible with DSM2 and the MR3000 receivers too)
Band: 2.4GHz
Servos: S200 (1)
Receiver: SR300 DSM 3-channel receiver
Model Memory: 1 (See the Tech Notes for more information about using the DX3E with more than one model)
Modes: Standard
Transmitter (Tx) Battery Type: AA alkaline (4 included)


Tech Notes

MODEL MEMORY

The DX3E can be used with multiple models that have the same type of Spektrum receiver without rebinding every time you switch receivers.  For example, the DX3E can be used with multiple DSM receivers (such as the SR300, SR3001, SR3300T or SR3500) after it has been bound to them.  The DX3E learns the receiver GUID during binding and knows which receiver it is connected to.  So when you switch to another receiver of the same type, simply turn on the receiver and transmitter and then double check your servo direction, travel, and trim and you're ready to go. 

If you switch to a different type of Spektrum receiver such as changing from a DSM receiver to a DSM2 receiver (SR3100 or SR3520), or changing from a DSM receiver to a Marine receiver (MR3000), or vice-versa then you will have to re-bind the transmitter to the receiver.

 

TELEMETRY

The DX3E is compatible with the Spektrum telemetry system. An SR3300T receiver (SPMSR3300T) or an SR3001 receiver (SPM1205) and telemetry module (SPM1325), plus the hand held unit (SPM1320) and the appropriate sensors are required. Please see the optional accessories for a complete listing of telemetry components.

« Go Back

Powered By PieCMS