The Traxxas E-Revo® was designed to be “Brushless Ready.” Now, with the help of Castle Creations™, E-Revo is officially brushless equipped. Power-hungry electric monster truck racers can purchase the ground-breaking E-Revo complete with a factory-installed and programmed Castle Creations Mamba Monster™ system. This heavy-duty setup includes Castle’s 2200kV motor for full 6S LiPo (25.2 volts max) compatibility, which gives E-Revo the ability to exceed 50mph with wheel-lifting torque and brutally quick acceleration. The Mamba Monster controller features a cooling fan and heavy-duty construction with oversized 6.5mm connectors while the motor uses a 5mm rotor shaft for added durability. Secure mounting keeps the ESC and on/off switch in place without relying on servo tape. The E-Revo requires no modifications to handle the extra power; all of the drivetrain and transmission components were designed from the start for exactly this type of high-amp, high-rpm horsepower. Super-Duty Revo®driveshafts, Torque-Control slipper clutch, an oversized steel idler gear and rubber sealed bearings are just a few of the features that make E-Revo ready for all the horsepower you can handle. Also new on the E-Revo Brushless Edition is the Traxxas TQ 2.4Ghz radio system that practically eliminates frequency conflicts while delivering the long range and reliability you expect from Traxxas.
Features
- Integrated dual battery compartments with quick release battery doors
- Scalable battery compartments from sport packs to brutal 6S Lipo power
- Dual digital waterproof steering servos deliver 125oz-in of torque & 0.16-sec transit time
- Hard-anodized Teflon-coated shock bodies with TiN coated shock shafts
- TQ 2.4Ghz DSS radio system
- Sealed pivot ball suspension
- Sealed limited slip differentials
- Hex hardware throughout
- Talon tires on 3.8" black chrome Gemini wheels
- Castle Creations Mamba Monster Features
- Rated for 6S LiPo operation
- Low-voltage detection for LiPo use
- 6.5mm gold-plated bullet connectors
- Castle Link compatible for tuning via computer using USB cable
- 5mm rotor shaft
- Now includes Two 7-cell NiMH 3000mAh Traxxas battery packs
Specs
Type: | 4WD Off road |
Scale: | 1/10 |
Length: | 22.91 inches (582mm) |
Width: | 16.38 inches (416mm) |
Wheelbase: | 14.1 inches (358mm) |
Weight: | 135oz (3.82kg) |
Chassis: | Molded Composite Nylon Tub |
Suspension: | Advanced Suspension Design |
Drive Train: | Shaft-Driven 4WD |
Tire Type: | Talon™ (5.75" x 3.8") |
Motor or Engine: | Castle Creations Mamba Monster 2200Kv |
Speed Control: | Castle Creations Mamba Monster Forward/Reverse/Brake |
Radio: | Traxxas TQ 2.4GHz |
Batteries: | Two NiCad or NiMH (stick)7.2V or 8.4V (6 or 7 Cell) |
Speed: | 35+mph (65+mph w/ LiPo Battery) |
Gear Pitch: | 32-Pitch |
Wheel Size: | 3.8" Gemini™ (black-chrome) with 17mm splined hex |
Kit/RTR: | RTR |
Shock Type: | precision aluminum shocks |
Body: | ProGraphix |
Ball Bearings: | Rubber Sealed Bearings |
Needed to Complete
-8"AA" batteries for transmitter-