*** Pre Order *** Traxxas Jato 4x4 Brushless BL-2S with clipless body
*** Pre Order *** Traxxas Jato 4x4 Brushless BL-2S with clipless body
Available in Black, Blue, Green and Red !!
Jato® 4X4 VXL rewrites the book on buggy performance with 60+ mph* speed and laser-focused precision. An ultra-low-CG chassis with optimal weight distribution allows Jato 4X4 to corner on rails with predictable handling at every turn. Outfitted with Traxxas’ toughest Extreme HD components, Jato 4X4 is properly equipped to transform big block 4s Velineon® horsepower into all-day fun.
The new Jato 4X4 is the 1/8 scale brushless buggy that does it all! Built with Traxxas’ toughest Extreme HD components, Jato 4X4 goes from the track to the skate park without missing a beat. Now your customers can have the precision of a race buggy with the toughness of Traxxas’ toughest off-road trucks.
BL-2s Brushless System
The BL-2s™ brushless power system ramps up the fun with up to 60% more speed and faster acceleration than comparable brushed power systems. Improved efficiency, high-speed ball bearings, and an internal cooling fan allow Jato 4X4 to run battery after battery for all-day fun. With no brushes to wear out, the BL-2s 3300 Kv is long-lasting and requires virtually no maintenance.
Next-Level Toughness
Factory-installed Extreme Heavy Duty Upgrade components give Jato 4X4 the superior strength and durability normally associated with Traxxas’ toughest off-road trucks. An ultra-rigid T-Bar reinforces the chassis with Extreme HD shock towers to support the suspension. Huge Maxx-Duty® driveshafts transfer every ounce of the motor’s torque to the wheels with unsurpassed strength.
Track-Ready Handling
Jato 4X4 sits low and wide, concentrating its weight below the driveshafts for exceptional handling and perfect weight distribution. Extra-long GTR shocks in the front and rear maximize traction by keeping Jato 4X4’s new Sledgehammer® buggy tires in constant contact with the ground. Add the optional sway bar kit (sold separately) for ultra-flat cornering and game-changing on-track performance.
Clipless Buggy Body
Jato 4X4’s form-fitted clipless body cuts through the wind and eliminates the parachuting effect for stable performance at speed. Tough clipless side latches hold the body securely in place but release in just seconds for fast battery swaps. Jato 4X4 incorporates the high-downforce wing from Sledge® to keep its chassis planted with rugged rollover protection as an added benefit.
Length: | 20.4 inches (517 mm) |
---|---|
Front Track: | 12 inches (305 mm) |
Rear Track: | 12 inches (305 mm) |
Ground Clearance: | 1.02 inches (26 mm) (center) |
Weight (no battery): | 5.2 pounds (2.36 kg) |
Height (overall): | 7 inches (179 mm) |
Wheelbase: | 12.6 inches (320 mm) |
Shock Length (front): | 3.98 inches (101 mm) - XX-long |
Shock Length (rear): | 3.98 inches (101 mm) - XX-long |
Speed Control: | BL-2s™ electronic speed control |
Motor (electric): | BL-2s™ 3300 Kv sensorless brushless |
Overall Drive Ratio: | 12.80:1 |
Differential Type: | Hardened steel bevel, sealed, limited slip |
Gear Pitch: | 32 |
---|---|
Chassis Structure/Material: | Composite tub |
Drive System: | Shaft-driven 4WD |
Steering: | Dual-bellcrank with integrated servo saver |
Tires: | Sledgehammer® with foam inserts |
Tire Diameter: | 4.5 inches (114 mm) (front and rear) |
Wheels (front/rear): | 3″ Gray buggy wheels |
Wheel Diameter: | 3″ inches (78 mm) |
Radio System: | TQ™ 2.4 GHz (2-channel) |
Servo: | Waterproof digital 2075 servo (125 oz-in torque) |
Skill Level: | 1 |
Battery Compartment (L/W/H): | 165 mm x 50 mm x 23/26 mm |
Required Batteries: | 4 “AA” (transmitter), Vehicle (see battery finder) |
*Battery and charger sold separately